Mediabridge MWN-WAPR300N User Guide - Manual (Page 41)

MWN-WAPR300N
36
 WPS Settings: To enable or disable WPS function. The default is “Enable”.
 WPS Mode: PBC (Push-Button Configuration) and PIN code.
 PBC: Select the PBC and click “Apply”, or press and hold the WPS button on the
back panel of the device for about one second. The WPS LED indicator will be
flashing for 2 minutes, which means the WPS is enabled. During this time
(flashing WPS LED), you can enable the wireless client to implement the
WPS/PBC negotiation between them. When the WPS connection is completed,
the LED indicator will be continuously lit. To add more clients, repeat the above
steps.)
 PIN: I f this option is enabled, you need to enter a wireless client’s PIN code in the
field and keep the same code in the WPS client.
NOTE:
The use of WPS function requires the wireless client to support this function. If all
devices do not support this function, then the devices that do not support it will not be
able to connect. We do not recommend using WPS as it is not as secure as using other
methods and creates compatibility issues in some networks.
5.2.2 WPA-PSK (WPA-Personal)
WPA authentication guarantees to protect wireless
users’ data and only the authorized
network users will have access to the WLAN via the specified Network Key.