Appendix 4 clear wireless configuration . 61, Appendix 4 clear wireless configuration – Mediabridge MWN-WAPR300N User Guide User Manual
Page 66
MWN-WAPR300N
61
3. The device is telling me that the password I am entering is incorrect.
Make sure you are entering the password exactly how it is entered in the router. The
password is case-sensitive. You can check to see how yours is set by logging into the
router’s web-based utility. Open an Internet Browser such as Internet Explorer or Firefox
and enter the following IP address into the address bar
Log in using the default Username: admin and Password: admin. Then click Wireless
Settings > Security Settings to see your password.
4. Windows is not asking me to enter the password but it just won’t connect to my
network.
Please see Appendix 4 below on how to clear your wireless configuration file.
Appendix 4 Clear Wireless Configuration
When trying to connect to your wireless network if you get an error message that
says “The Security Settings Do Not Match the Requirements of the Network” or
“Security Key Mismatch”, then you will need to clear the saved settings in your
wireless networks list.
Clear Wireless configuration file under windows XP
1.
Right click “My Network Places” on your computer desktop and select “Properties”.
2. Right
click “Wireless Network Connections” and select “Properties”.