Seed Hawk Ground Drive: Granular & Liquid 2011 - Manual (Page 17)

Seed Hawk
®
Manual Granular and Liquid Tanks Page 12
DANGER! ENTANGLEMENT HAZARD.
Keep hands, feet, and clothing away from
auger intake.
2.9.2 Safety Sign Information
• All safety signs applied to the implement must be visible and legible. Keep dust
and dirt cleared from safety signs and ensure that visibility is not obscured.
• Replacement safety signs may be ordered through your dealer or distributor.
Contact Seed Hawk Inc. if you are unable to obtain replacement safety signs
from a dealer or distributor.
• Remove and replace any safety signs that have either damaged or show signs
of deterioration.
• Ensure that parts or components that are replaced on the implement that had a
safety sign attached originally include a safety sign.
1. Ensure proper position and orientation before installing
Affixing Safety Signs to Implement
2. Ensure installation area is clean and dry
3. Ensure ambient temperature is above 10
˚ C (50˚ F)
4. Remove backing material to expose label adhesive
5. Place one edge of label to machine surface
6. Slowly press the label onto the surface
7. Ensure no air pockets exist under surface of label