Seed Hawk Ground Drive: Granular & Liquid 2011 - Manual (Page 28)

Seed Hawk
®
Manual Granular and Liquid Tanks Page 23
4.2.4 Conveyor Transport Position
NOTE: Fill conveyor should always be
secured for transport, no matter how
short the distance. Clean out conveyor
prior to transport or storage.
1. Arrange the conveyor so that the upper
rest is positioned on the conveyor mount
at the front of the tank, Figure 21.
2. Raise the locking mechanism at the rear
of the tank, Figure 22. The handle can
be rotated towards the tank for
transport. Ensure to place pin back into
locking mechanism so that it cannot
disengage during transportation, Figure
23.
3. Engage outer arm locking mechanism,
Figure 24. Again ensure to replace pin
so that lock does not disengage during
transportation.
4. Push conveyor diverter valve back to the
fan position.
Figure 21
Figure 22
Figure 23
Figure 24