Seed Hawk Ground Drive: Granular & Liquid 2011 - Manual (Page 22)

Seed Hawk
®
Manual Granular and Liquid Tanks Page 17
4.1.1 Positioning the Auger
NOTE: Ensure that the area in the vicinity of auger operation is free of
obstructions and that all bystanders, especially children, are kept at a safe
distance before positioning or operating the auger.
1. Ensure your tractor circuit is
engaged in the correct direction prior
to engaging the auger diverter valve.
If circuit is already engaged direct the
fan diverter valve to the fill auger
position from the fan location. Figure 6.
Use the remote provided to move the
auger in and out of transport. NOTE: If
remote does not operate properly use
manual levers to keep using the
auger.
2. Unlock lever to take out of transport 1
Figure 7. Move the outer arm first when
positioning auger. 1 Figure 8.
3. Unfold auger and position it where filling
and emptying the tank is optimal.
4. Hydraulic cylinder will hold in position so
auger will not move if positioned on level
ground.
5. Allow hopper to come into contact with
the ground before final positioning.
1
1
Figure 6
Figure 7
Figure 8