Spectra Precision ProMark Field Software - Manual (Page 16)

English
10
When enabled, vocal information is provided when the
receiver delivers its first position solution, and every time
the position status changes state. In stake out, vocal
instructions (distance and direction to point) are regularly
provided to guide you to the stakeout point until you get
to that point. When raw data are collected in static mode,
vocal information is given to indicate a change to the
current value of the observation timer (see Rover
Collecting Raw Data in Static on page 23).
7. Tap on the Keyboard tab. Use this tab to enable or disable
the large on-screen keyboard. The large keyboard is only
available for use within the ProMark Field application.
Only the Microsoft smaller keyboard can be used when
working from within the operating system.
8. For background maps ( Map tab), see Adding Background
Maps on page 57.
9. For connecting external devices and using/calibrating the
e-compass, see E-Compass & External Device on page 61.
10.Tap OK to validate all your choices.
Minimizing the
ProMark Field
Window
Tap in the upper-right corner of the map screen.
To re-open the ProMark Field window, either tap on “ProMark
Field” on the Home screen or the icon at the bottom of the
Home screen.
Minimizing the ProMark Field window has no effect
whatsoever on software operation. The receiver will continue
to operate normally while the window is minimized.
Quitting ProMark
Field
Use the Menu>Exit option to quit the program.
Caution! Tapping in the upper-right corner of the screen
only minimizes the ProMark Field window and so does not
fully exit the program.
If a GSM modem is being used to acquire corrections when
you ask the program to quit, the message “
Disconnect
data link?” will show up. ProMark Field will quit only after
you have answered the question.