Spectra Precision ProMark Field Software - Manual (Page 8)

English
2
a full description of each of the surveyed points (name,
coordinates, solution status, PDOP, number of satellites
used, etc.) will be saved to the job file.
In a real-time RTK project, the coordinates of all the
surveyed points saved to the job file will feature
centimeter accuracy. In a post-processed project, they will
only be meter accurate.
Points may be logged individually (static or stop & go
surveying), or automatically along a line (trajectory) at a
preset interval of time or distance (continuous kinematic
surveying).
ProMark Field can host a background map showing all the
useful details of your working area. Background maps should
be in ecw, osm, bmp, gif, tif, jpg or jp2 format. They can be
viewed on the map screen in the background.
ProMark Field integrates a large virtual keyboard to make
data entry easier in the field. When enabled, this keyboard
appears automatically on the screen every time you tap inside
a user-editable data field.
The ProMark Field keyboard is a good alternative to the
Microsoft operating system’s smaller on-screen keyboard. It
can however be disabled if the smaller Microsoft virtual
keyboard is more suitable in your case of use.
ProMark Field allows you to set the receiver as an RTK base,
generating corrections data in one of the commonly used
formats (RTCM, CMR, CMR+ or ATOM). ProMark Field will
allow you to configure the data link through which corrections
will be delivered to users, based on the use of the receiver’s
built-in cellular modem or an external cell phone via
Bluetooth, or using an external UHF radio transmitter.
ProMark Field supports the built-in e-compass. See E-
Compass & External Device on page 61.