Setting an external device – Spectra Precision ProMark Field Software User Manual
Page 69
Advertising
Engl
ish
63
• Using the E-compass is recommended for static
occupations. The GPS compass is recommended in
kinematic.
• E-compass readings stabilize after a few seconds. When
logging a point after a walking period, please hold the
receiver horizontally and wait a few seconds before
starting logging.
Setting an External
Device
• Tap
Menu>Options.
• Tap on the right-arrow button several times until you
unveil the
External Devices tab.
• Tap on the
External Devices tab.
• Tap on the
Connect button.
• Select the device used from the
Device type field.
• Set the virtual port number (
Port) and baud rate (Baud rate)
used to let your receiver communicate with this device.
• Tap
OK to enter your settings and return to the map
screen.
Advertising