Spectra Precision ProMark Field Software - Manual (Page 55)

Engl
ish
49
Real-Time RTK
Projects
This step is recommended in real-time RTK projects to
reduce the time needed before the rover can provide its first
“fixed” position solution (i.e. “FIXED” position status
displayed on the screen). Four initialization methods are
possible:
Initialization
Method
What You Are Supposed To Do
From Bar
It is assumed that you are using your own base. Start your proj-
ect with the rover antenna placed at the end of the initializer bar
(installed at the base). Wait until the “FIXED” position status is
displayed on the screen, then move the antenna to the top of
the rover pole, taking care not to obstruct the antenna. Then
start your project.
From Known
Point
Place the rover antenna on a point the coordinates of which are
known to the receiver. Keep the antenna immobile on this point
until the “FIXED” position status is displayed on the screen.
Then start your project.
On the Fly
Default initialization mode for which nothing particular needs to
be done at the beginning of the project. Whether you are static
or walking when you start the project, wait until the “FIXED”
position status is displayed on the screen before actually start-
ing your work.
Statically
Start your survey from any point and remain static on this point
until the “FIXED” position status is displayed on the screen.