Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 179)

Other Conventional Surveying Tutorials
169
Aim the Total Station
14. Using the information displayed on the
screen, aim the total station toward the
design point and tap Stake >. The graphic
portion of the screen shows the curve,
backsight direction and design point
location relative to the total station.
Stake the Point
15. The final screen allows you to stake the
current station. With the rod positioned
where you want it, tap the Shot button to
take a shot. If necessary, move the rod and
take another shot until it is over the design
point.
16. Tap the Store button to save the stake
point. You will automatically be returned
to the second screen (Step 9) where you can
then tap the Next Station button to advance
the current station by the station interval
and stake the next point.