Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 30)

User’s Manual
20
down list. The preset configuration for the selected Smart Target will
be automatically set.
Manage Smart Targets
Select Manage Smart Targets from the same drop-down list described
above to access the Manage Smart Targets screen. From here you
can create a new custom Smart Target or edit
any existing Smart Target.
Survey Pro includes two foresight Smart
Targets called My Prism and My Reflectorless,
respectively and one backsight Smart Target
called My Backsight Prism. These can be edited
or deleted, but at least one prism and one
reflectorless foresight Smart Target and at
least one prism backsight Smart Target must
exist at all times. Because of this, for example,
you would not be able to delete My Backsight
Prism unless another Smart Target with a
prism target type for your backsight was available. Similarly, you
would not be able to change My Reflectorless to a prism target type
unless you already had another foresight Smart Target configured
with a reflectorless target type.
To delete an existing Smart Target, tap it to select it and then tap
Delete .
Tapping Sort will sort the list of Smart Targets alphabetically.
You can also activate a Smart Target from this screen by tapping the
desired Smart Target to select it and then tapping Activate ,
although it’s faster to activate Smart Targets using the shortcut
described above. The active Smart Target is shown with a symbol
next to it.