Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 38)

User’s Manual
28
• GPS setup information such as localization, mapping plane,
etc. (Requires GPS Module)
The Settings screen actually consists of several
independent screens where each individual
screen contains different types of settings.
There are two ways to navigate to the various
screens. The first method is to tap the
button to drop down the list of available
screens and then tap on the desired screen
from the list to open it. The second method is
to tap the buttons to the side of the screen title,
which will open the previous or next screen
respectively. For example in the screen shown,
you could tap to open the previous
(General Settings) screen, or tap to open the next (Units
Settings) screen. Repeatedly tapping either of these buttons will
cycle through all the available screens.
Consult the Reference Manual for an explanation of each field on
every Settings screen.
If using a Bluetooth total station, refer to the Bluetooth section on
Page 292.
File Management and
ForeSight DXM
Survey Pro uses a variety of files to store data and information
about your project. The files include the main data file, the .JOB file,
and the raw data file, the .RAW file, and several other supplementary
files that Survey Pro can use for additional information. To help
manage this data and to supplement Survey Pro capabilities, TDS
has an office product called ForeSight DXM.
ForeSight DXM is a complete data management tool that works
directly with Survey Pro data files. ForeSight DXM can make any
project easier to manage and makes doing every day tasks, such as
downloading, quick and easy. ForeSight DXM has a variety of