Fire-Lite DACT-UD2 Digital Alarm Communicator/Transmitter - Manual (Page 24)

Programming for DACT-UD2
24 DACT-UD2 Communicator PN 53037:B 4/01/08
Test Time Interval
Pressing 1 while viewing Primary/Secondary Screen #1 will cause the following
screens to be displayed:
The test report sent to the Central Station phone number may be sent once every 6,
8, 12 or 24 hours. Select the desired Test Time Interval by pressing the
corresponding digit in the screens shown above.
Account Code
Pressing 2 while viewing Primary/Secondary Screen #1 will cause the following
screen to be displayed:
The Account Code, which is assigned by a Central Station, depends on the
communication format being used. The Account Code screen will have a flashing
cursor in the lower left corner. Enter the supplied account code using 0 - 9 and A- F
keys.
Note: If the Account Code being entered is a three digit number, enter the three
digits first and then add a 0 (zero) as the fourth digit.
CENTRAL STATION
1=TEST TIME INT
2=ACCOUNT CODE
3=24HR TST TIME
Primary/Secondary Screen #1
TEST TIME INTERVAL
1=24 HOURS
2=12 HOURS
3=8 HOURS
Test Time Interval Screen #1
TEST TIME INTERVAL
1=6 HOURS
Test Time Interval Screen #2
ACCOUNT CODE
4 CHAR RANGE 0-F
Account Codes Screen