Fire-Lite DACT-UD2 Digital Alarm Communicator/Transmitter - Manual (Page 34)

Remote Site Upload/Download
34 DACT-UD2 Communicator PN 53037:B 4/01/08
Pressing 3 for Remote Download while viewing the main menu will cause the
following screen to be displayed:
The Remote Download password (default 00000) must be entered to access the Remote
Download feature. Note that the default password can be changed using the Password
Change option (refer to the FACP manual programming section). Entering the correct
password will cause the following screen to be displayed:
Pressing 1 for Proprietary No (factory default setting), while viewing the Remote
Download screen, will cause the display to toggle from Proprietary No to Proprietary
Yes. Each press of the 1 key will cause the display to toggle between Proprietary No
and Proprietary Yes. Selecting Proprietary Yes will program the FACP to allow remote
programming downloads from the PK-Plus programming utility at all times without the
need to access the Remote Download screen.
Pressing 2 for Accept Download will cause the following screen to be displayed:
While this screen is displayed, remote programming downloads are allowed regardless
of the Proprietary setting. Exiting this screen will disable any further downloads to the
FACP. Also, following 30 minutes of inactivity (including up/downloading), the
Accept Download screen will time-out, causing the display to return to the System All
Normal screen.
REMOTE DOWNLOAD
ENTER PASSWORD
*****
REMOTE DOWNLOAD
1=PROPRIETARY NO
2=ACCEPT DOWNLOAD
*ALLOWING DOWNLOADS*
IF YOU EXIT THIS
SCREEN DOWNLOADS
WILL BE DISABLED!