Fire-Lite DACT-UD2 Digital Alarm Communicator/Transmitter - Manual (Page 32)

Central Station Communications
32 DACT-UD2 Communicator PN 53037:B 4/01/08
The table below shows UL listed receivers which are compatible with the DACT-UD2.
1. With 685-8 Line Card with Rev. 4.4d software
2. With 124060V206B and 124063 Line Card Rev. B
3. With version V2.4 Receiver and 126047 Line Card Rev. G
4. With 124077V2.00 Receiver and 126047 Line Card Rev. M
5. With V.7301 Receiver S/W
6. With 01.01.03 Receiver S/W and Line Card 01.01.03
7. With software V1.86
8. With software V1.72
9. With DSP4016 and V1.6 Line Card
10. With software V3.9
IMPORTANT! It is the installer’s responsibility to ensure that the Digital Alarm
Communicator/Transmitter is compatible with the Central Station Receiver, utilized by
the monitoring service, prior to installation. The Compatibility Table provides a list of
compatible receivers and associated software versions for the receivers. Changes in
the hardware and/or software by the receiver manufacturers may affect the receiver
compatibility with the FACP DACT. After completing the installation, communication
between the DACT and Central Station Receiver must be tested and verified.
Table 4.1 Compatible UL Listed Receivers
Format Ademco 685 (1) Ademco MX8000 (2) Sile
nt Knight
9500
(3)
Sile
nt Knight
9800
(4)
Osborne Hoffma
n
2000
E (5)
Radionics 6600
(6)
Sur
Gar
d
MLR2 (7) Sur
Gar
d
Syste
m
III
(8)
Sur
Gar
d
MLR-2000 (9) FBI CP2
20FB (10)
0 SIA-DCS-8       
1 SIA-DCS-20       
2 Ademco Contact ID