Fire-Lite PS-Tools MS-9050 - Manual (Page 34)

26 50 Pt Addr Panel
PS-Tools 08/2010
Configuring Fire Panels
Figure 5-2 Configuring Primary Central Station
Primary Central Station window provides information on the primary central station programming
which includes:
• Phone Number
• Communication Format
• Account Code
• Test Time Interval
• Test Start Time
• Event Codes
To configure the primary central station
1. Type the Phone Number of the primary central station. You can type a maximum of 20
characters with valid entries being 0 through 9 and A through F.
2. Select the Communication Format of the reports sent to the primary central station. The
primary event codes are displayed based on the communication format used.
Note If the communication format changes, the event codes are set to default values.
3. Type the Account Code for the panel. Each panel has a unique account code, depending on the
primary central station and the communication format being used.
4. Select the desired Test Time Interval (6, 8, 12 or 24 hours) to send the test report to the
primary central station.