Graphical view – Fire-Lite PS-Tools MS-9050 User Manual
Page 63
Advertising
PS-Tools User Guide
50 Pt Addr Panel
PS-Tools
08/2010
55
Graphical View
To perform simulation in graphical view
1.
Click Graphical View under Simulation in the left pane or click Next in the Simulation >
TabularView pane.
By default, Under Loops, Loop1 is selected to view the input output device correlations.
2.
To view the devices mapped to a specific zone, click Show Devices Mapped to Zone#.
3.
Type the zone number.
4.
Click Show to display the detectors and modules mapped to the selected zone.
5.
Click Refresh Grid to restore the normal display.
6.
Click Stop.
7.
To view the device-to-device mapping, click Show Device-to-Device I/O Simulation.
Advertising