Ring count error, Other fire alarm system events – Fire-Lite PS-Tools MS-9050 User Manual
Page 97
Advertising
92
50 Pt Addr Panel
PS-Tools
08/2010
Troubleshooting
Ring Count Error
Fault: The following message is displayed when you are connecting PS-Tools to the fire panel.
This happens when ring count is set to zero.
Resolution: Set the ring count to a value other than zero, to establish the connection.
Other Fire Alarm System Events
Problem: The troubleshoot data, uploaded from the fire panel into PS-Tools, displays the detector
sensitivity data, LED and piezo status, and NAC status. In addition, it displays the list of currently
active system or point events such as troubles, alarms, and supervisory.
Advertising