Fire-Lite PS-Tools MS-9050 - Manual (Page 81)

50 Pt Addr Panel
PS-Tools 08/2010 75
6
6 Upload/Download Configuration Data
The configuration process is completed only when you download the saved configuration to the fire
panel. Using the Upload/Download option in PS-Tools, you can:
• Download saved configuration and other panel settings to the fire panel.
• Upload Configuration Data, History Data, Walktest Data, Troubleshoot Data, System Status,
and Point Status information from the fire panel to the computer.
• View all the uploaded data from the fire panel to monitor the fire alarm system and identify
troubles, alarms, and other events.
Section Description
Refer
to
Viewing Connection Set-
tings To view the connection settings. page 75
Connect/Disconnect to Fire
Panel To connect/disconnect to the fire panel. page 77
Download Configuration
Data to Fire Panel To download configuration data from
PS-Tools to the fire panel.
page 79
Upload Configuration
Information from Fire
Panel To upload configuration data from the fire
panel. page 82
Ensure the fire panel remains in the ‘Normal’ state when you download or upload data to and from
the fire panel. You can connect the computer to the fire panel, using a serial port, or modem.
The following table describes the tasks you can perform using different sections of this chapter.
Connection Settings
The connection settings option displays the details of the Modem or Serial port, attached to the
computer for communication with the fire panel. The modem can be a Serial Modem.