HT instruments HT5000 - Manual (Page 27)

HT-5000
EN - 26
5 MAINTENANCE
5.1 REPLACEMENT FLOOR CAP OF THE RECEIVER RX5000
The plastic floor cap, which prevents the tip of the receiver from being damaged, can be
easily replaced with the aid of a pointed object (e.g. screwdriver).
Fig. 14: Replacement of the floor cap
5.2 REPLACEMENT BATTERIES OF RECEIVER RX5000
The status of the receiver's batteries is checked upon start-up and indicated in the display:
The system regularly checks the battery strength as well. If battery capacity falls below 10
% of the threshold value, an audible warning signal is given and the current status of the
batteries is shown in the upper part of the display:
In order to replace the 10x1.5V batteries type AA, the battery housing must be removed
(e.g. using a coin) as described in the following illustrations
Fig. 15: Replacement internal batteries of RX5000
1 2