HT instruments HT5000 User Manual
Page 28
HT-5000
EN - 27
5.3 REPLACEMENT
BATTERIES OF TRANSMITTER TX5000
The batteries in the transmitter TX5000 have to be replaced as soon as the red LED
battery indicator starts to blink
Should this occur while the user is busy locating a line with the receiver, he/she will be
informed of the weak batteries via the reception signal:
Type of signal
Normal signal
Signal when batteries are weak
In order to change the 6x1.5 V batteries type LR20, both screws on the back of the
transmitter must be (e.g. with the aid of a coin) turned through ¼ turn (1) and the battery
tray must be pulled (2) (see Fig. 16). Please note that all the batteries are fitted in the
same direction
Fig. 16: Replacement batteries of TX5000
5.4 CLEANING
To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water
5.5 END OF LIFE
CAUTION
: this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal