Jenway 6850 - Manual (Page 15)

15
5.3 SAMPLE INFORMATION
The Information tab allows the user to enter
sample and standard information. Additional
notes can be entered into the Memo field if
required.
5.4 SAMPLE MEASUREMENT AND DISPLAY OPTIONS
The Sample tab contains a result window and a
Control window. The Control window contain
options to Start, Delete, Modify, Recalculate,
change the Data Font and Print.
5.4.1 Control Window – Start
Select the Start button to initiate a
multiwavelength measurement. A new window will
open that displays the measured photometric
values. Once complete, select OK to finish. The
result window will be updated with the measured
values.
5.4.2 Control Window – Delete
Select the Delete button to delete a completed sample measurement.
5.4.3 Control Window - Modify
Select the Modify button to re-measure a sample’s photometric values. The updated values will over-
right any previously recorded data.