Jenway 6850 User Manual
Page 4
4
SECTION 1 – Introduction
1.1
PC SOFTWARE DESCRIPTION
The Prism PC software allows the user to fully control the functionality of the Jenway 6850 variable
bandwidth, double beam UV/visible spectrophotometer. The software replicates all functions from the
instrument interface and adds additional functionality, extensive post-measurement tools, unlimited
results storage and allows the easy export of data to other PC software packages. The Prism PC
software has measurement modes for photometrics, concentration, multi-wavelength, spectrum
scanning, quantitation, kinetics, DNA and protein analysis.
1.2 REQUIRED
PC
SPECIFICATION
Pentium processor or above;
CD-ROM
drive;
USB
Port.
32MB Memory minimum (256MB or greater recommended);
50MB free hard disc space;
Microsoft Windows 2000/XP/Vista/7.
SECTION 2 – Installation
2.1 UNPACKING
Remove the 6850 from the packaging and ensure the following items are included:
1. PC software CD and USB security dongle (685 035)
2. USB
Cable
2.2 INSTALLATION
Please disconnect the USB cable connecting the installation PC and the 6850 instrument.
Please also ensure that the USB security dongle is not attached to the PC.
1.
Insert the Prism software disc in the CD-ROM drive of your PC.
2.
Navigate to the CD-ROM drive directory and double click on the Prism software icon to open the
CD-ROM, and then double click Setup.exe to start the software installation.