KYORITSU 4202 - Manual (Page 3)

̶ 1 ̶
1. Safety Warnings
This instrument has been designed, manufactured and tested according to IEC
61010: Safety requirements for Electronic Measuring apparatus, and delivered
in the best condition after passing quality control tests. This instruction manual
contains warnings and safety procedures which have to be observed by the user to
ensure safe operation of the instrument and to maintain it in safe condition.
Therefore, read through these operating instructions before using the instrument.
# WARNING
Read through and understand the instructions contained in this manual
before using the instrument.
Keep the manual at hand to enable quick reference whenever necessary.
The instrument is to be used only in its intended applications.
Understand and follow all the safety instructions contained in the manual.
It is essential that the above instructions are adhered to. Failure to follow the
above instructions may cause injury, instrument damage and/or damage to
equipment under test.
○ The symbol # indicated on the instrument means that the user must refer
to the related parts in the manual for safe operation of the instrument. It is
essential to read the instructions wherever the # symbol appears in the
manual.
# DANGER : is reserved for conditions and actions that are likely to cause
serious or fatal injury.
# WARNING : is reserved for conditions and actions that can cause serious or
fatal injury.
# CAUTION : is reserved for conditions and actions that can cause injury or
instrument damage.
○ Following symbols are used on the instrument. Attention should be paid to each
symbol to ensure your safety.
# This symbol indicates that the user must refer to the explanations in the
instruction manual.

This symbol indicates that the instrument is protected by double or reinforced
insulation.
This symbol indicates that this instrument can clamp on bare conductors.
∼
This symbol indicates AC.