KYORITSU 6300 Instruction Manual - Manual (Page 112)

MODEL6300
8. 14
MODEL6300 Section 8 Demand value measurement
Section
8
‣ ‧ • ⁈ ‥ •• ⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥⁉ ‥⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣ • ″ ․• ″ ‧ • ″ ‣ •• ″ ․ • • ″ ‧ • • ″ ‣• • • ″
8-5 Resetting the demand value
There are three methods for resetting (deleting) the current demand values on
the display screen.
* Press ESC key on DEMAND range at least 2 sec. Then a message
“oFF” (meaning not reset) flickers. Select “on” (reset) with the Cursor key,
and press the ENTER key. The previous measured demand value will be
reset, and the integration value on Wh range will be reset as well.
If the the ENTER or ESC key are pressed while “oFF” is flickering, the no rest
is performed.
* Reset the demand value at “Setting 18”.
* System reset
NOTE
* If it is desired to retain the integration value, start demand measurement
without resetting the demand values. The items on
DEMAND range other
than the max. demand value and corresponding time and date, are reset
automatically.
* Demand value cannot be reset during a measurement or while the
instrument is in stand-by mode.
Any of
‣ ‧ • ⁈ ‥ •• ⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥⁉ ‥⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣ • ″ ․• ″ ‧ • ″ ‣ •• ″ ․ • • ″ ‧ • • ″ ‣• • • ″