KYORITSU 6300 Instruction Manual - Manual (Page 130)

MODEL6300
10. 8
MODEL6300 Section 10 Communication function/ Supplied software
Section
10
10-5 Download to PC
(1) Connect the instrument and your PC with a USB cord, and set the
Function switch to SET UP range.
(2) Start “KEW POWER PLUS 2”, and click “Download” on the Main window.
(3) Select the instrument displayed on the “List of detected Power Meters”.
Then click “Connect”.
(4) When the instrument and your PC are connected properly, Download
window appears. When error message appears, check whether USB cord
is connected properly; or the instrument is on and the Function switch is
set to SET UP range or not.