KYORITSU 6300 Instruction Manual - Manual (Page 27)

4. 1
MODEL6300
Section 4 Setting MODEL6300
4. Setting
This section deals with settings for measurement and data saving.
Set the Function switch to
SET UP range as follows.
Ɣ Key operation during Setup
Keys Details

START/STOP
key
No use

BACKLIGHT
key
Switches on/off the backlight of the LCD.
UP & DOWN
cursor key
* To browse through setting items.
* To change the details of setting items.
* To change numbers.
LEFT &RIGHT
cursor key
* To browse through setting items.
* To change the value/status of setting items.
* To select digits.



ENTER key
* To select setting items.
* Press this key on the desired setting item,
thus going into the setting change mode. The
previous value of that particular setting item
will flicker.



ESC key
* To cancel settings. Following above step, this
key will cancel value selected, restore pre-
vious value and exit setting change mode .
Data hold function is disabled.


DATA HOLD
key
Pressing this key for at least 2 sec. disables
all key operations. (except for Backlight switch)



SAVE key No use