KYORITSU 6300 Instruction Manual - Manual (Page 118)

MODEL6300
8. 20
MODEL6300 Section 8 Demand value measurement
Section
8
8-7 Displayed Digits/ Over-range indication
* Digits
* Predicted demand value (Guess), Present demand value (Present):
max 6 digits
The digits of the predicted and present demand values are corresponding to
the target demand values listed in the table below.
Target demand value
(“Setting 16”)
Digit and decimal point
0.1 ~ 999.9 W 99999.9 W
0.1 ~ 999.9 kW 99999.9 kW
0.1 ~ 999.9 MW 99999.9 MW
0.1 ~ 999.9 GW 99999.9 GW
* Load factor (%):max 6 digits 9999.99%
Ɣ Over-range indication/ others
When the predicted demand value, present demand value(max demand valu
and load factor
exceed 99999.9, segment becomes “ ”.
* When the input voltage and the current exceeds the max display counts,
or mark is displayed on the LCD. In this case, accurate
measurement cannot be made.
* On the W range, when the P (active power) is shown by bars “- - - -”,
this means that the increment in electric energy is insignificant.
* Refer to “6-5-2 Over-range indication/ Bar indication” in this manual.