KYORITSU 6300 Instruction Manual - Manual (Page 135)

11. 1
MODEL6300
Section 11 Other functions MODEL6300
11. Other functions
Ɣ Time (clock)
This instrument has clock function, and the time is set to Japan time by
default. On
SET UP range, time/date information can be viewed or
changed. Refer to “Setting 07” in section 4 in this manual.

Ɣ Backlight
Pressing the
BACKLIGHT key ( ) switches on/off the backlight for LCD.
The backlight is automatically switched off when it remains on for about 5min.
Ɣ Data hold
The indicated value on the LCD is held by pressing the
DATAHOLD key
( ), and “ ” mark appears on the LCD.
At this bout, the instrument is performing calculation and data save.
Data hold function works on each range as follows.
“Available” : Pressing the
DATAHOLD key holds the indicated value.
The values on each measurement are also held.
“Invalid” : Data hold function doesn’t operate even if the DATAHOLD key is
pressed.
Data hold function on each range
Status
W
range
Wh
range
DEMAND
range
SET UP
range
Measuring
instantaneous value
Available Invalid
Stand-by for integration Invalid
Measuring
integration value
Available Invalid
Stand-by for demand Invalid
Measuring
demand value
Available Invalid
Data hold function is released and “ ” mark disappears by pressing the
DATAHOLD key again. This function can be released on any range.
NOTE
* Keys are locked by pressing the DATAHOLD key at least 2 sec. either Data
hold function is on or off. If both Data hold and Key lock functions are
enabled at the same time, Data hold function cannot be released until the
Key lock function is released.
* When the Function switch is set to OFF, both functions are released.