Asante Technologies INTRACORE 3724PWR - Manual (Page 124)

show port all
This command is used to display all switch interface
Format show port all
Mode Privileged Mode
11.2.11.11 show port-security
This command is used to display port security settings
1) show port-security port
This command is used to specify an switch interface
Format show port-security port <port-ID>
Mode Privileged Mode
2) show port-security all
This command is used to display all interfaces’ status
Format show port-security all
Mode Privileged Mode
11.2.11.12 show rate-limit
This command is used to ingress and egress rate limit information
1) show rate-limit port
This command is used to specify an switch interface
Format show rate-limit port <port-ID>
Mode Privileged Mode
e.g. Switch#Show rate-limit port 1
Switch#Show rate-limit port g1
2) show rate-limit all
This command is used to display all interfaces’ status
Format show Rate-Limit all
Mode Privileged Mode
11.2.11.13 show running-config
This command is used to display switch running config
Format show running-config
Mode Privileged Mode
11.2.11.14 show snmp
This command is used to display all snmp config
1) show snmp groups
This command display all snmp groups
Format show snmp groups
Mode Privileged Mode
2)show snmp users
This command display all snmp users
Format show snmp users
Mode Privileged Mode
3) show snmp communities
This command display all snmp communities
Format show snmp communities
Mode Privileged Mode
11.2.11.15 show sntp
This command is used to display switch sntp information
Format show sntp
Mode Privileged Mode
11.2.11.16 show spanning-tree
This command displays Spanning Tree information
1) show spanning-tree interface
This command displays RSTP ports information
show spanning-tree interface port
This command specify an switch interface
Format show spanning-tree interface port<port-ID>
Mode Privileged Mode
124 Asante IC3724PWR User’s Manual