Asante Technologies INTRACORE 3724PWR - Manual (Page 141)

2) access-list name <WORD> set IP-mode
access-list name <WORD> set IP-mode SRC IP.
This command specifies a source IP address.
Format access-list name <WORD> set IP-mode SRC IP <IP-addr>
<mask-addr>
Mode Global Config
access-list name <WORD> set IP-mode DST IP
This command specifies a destination IP address.
Format access-list name <WORD> set IP-mode DSP IP <IP-addr>
<mask-addr>
Mode Global Config
3) access-list name <WORD> set L4port
This command specifies the TCP/UDP port range.
access-list name <WORD> set l4port SRC-port
This command specifies the source TCP/UDP port range.
Format Access-list name <WORD> set L4 port SRE-port from <1-65535>
to <1-65535>
Mode Global Config
access-list name <WORD> set l4port DST-port
This command specifies the destination TCP/UDP port range.
Format access-list name <WORD> set l4port DST-port from <1-65535> to
<1-65535>
Mode Global Config
4) access-list name <WORD> set IP-mode packet-type
This command specifies the packet type.
Format access-list name <WORD> set IP-mode packet-type
{ICMP|IGMP|IP|TCP|UDP|GRE}
Mode Global Config
5) access-list name <WORD> set mac-mode
Specify ACL entry priority.
access-list name <WORD> set mac-mode mac SA
This command specifies a source mac address.
Format Access-list name <WORD> set mac-mode mac SA <mac-addr>
<mask-addr>
Mode Global Config
access-list name <WORD> set mac-mode mac DA
This command specifies a destination mac address.
Format access-list name <WORD> set mac-mode mac DA <mac-addr>
<mask-addr>
Mode Global Config
access-list name <WORD> set mac-mode ether-type
This command specifies the ether type of the packet.
Format access-list name <WORD> set mac-mode ether-type
{ipv4|ARP|xns}
Mode Global Config
11.3.24 arp Commands
Note: This commands only support on GG24 GIGABIT PORTS WITH 2
SHARED MINI-GBIC SLOTS/G44 GIGABIT PORTS WITH 4 SHARED
MINI-GBIC SLOTS L2 MANAGEMENT SWITCH)
11.3.24.1 arp dynamic
1) arp dynamic enables and disables.
This command enables and disables dynamic arp functions.
Format arp dynamic {enable|disable}
Mode Global Config
2) arp dynamic aging-time
This command set arp dynamic aging-time between 0s and 999s.”0”means
141 Asante IC3724PWR User’s Manual