Asante Technologies INTRACORE 3724PWR - Manual (Page 135)

This command specifies robustness variable.
Format set igmp robustness <1-20>
Mode Global Config
8) set igmp router-port
This command specifies igmp router port.
Format set igmp router-port ports <port list>
Mode Global Config
e.g. Switch(config)# set igmp router-port ports 1-10
11.3.16.2 set igmp-querier
This command configures igmp querier.
Format set igmp-querier {enable | disable}
Mode Global Config
11.3.16.3 set igmp-proxy
This command configures igmp proxy.
Format set igmp-proxy {enable | disable}
Mode Global Config
11.3.16.4 set static-mcast
Configure static multicast.
1) set static-mcast name <WORD> add
This command create a multicast group.
Format set static-mcast name <WORD> add vid <vlan-ID> mac
<mac-addr>member port <port list>
Mode Global Config
2) set static-mcast name <WORD>delete
This command delete a static multicast group.
Format set static-mcast name <WORD>delete
Mode Global Config
11.3.17 snmp commands
11.3.17.1 snmp notify
This command configures snmp notification.
Format snmp notify {enable|disable}
Mode Global Config
11.3.17.2 snmp group
1) snmp group add
This command create a snmp group.
Format snmp group add <WORD>version <1-2>
Mode Global Config
2) snmp group delete
This command delete a snmp group.
Format snmp group delete <WORD>
Mode Global Config
11.3.17.3 snmp user
1) snmp user add
This command creates a snmp user.
Format snmp user add <user name> group <group name> version <1-3>
Mode Global Config
2) snmp user delete
This command deletes a snmp user.
Format snmp user delete <WORD>
Mode Global Config
11.3.17.4 snmp community
1) snmp community add
This command creates a community.
Format snmp community add <community name> group <group name>
mgmt-ip <ip-addr>
Mode Global Config
135 Asante IC3724PWR User’s Manual