Asante Technologies INTRACORE 3724PWR - Manual (Page 145)

Format rate-limit egress <rate>
Mode Interface Config
11.4.13.2 rate-limit Ingress
This command limits ingress rate, which the unit is Kbps.
Format rate-limit ingress <rate>
Mode Interface Config
11.4.14 storm-control command
11.4.14.1 storm-control
Enable/disable storm control.
Format storm-control disable
Mode Interface Config
11.4.14.2 storm-control broadcast
This command storm control for broadcast only, and limited
value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps
and 0 means no limit.
Format storm-control broadcast <rate>
Mode Interface Config
11.4.14.3 storm-control broadcast-multicast
This command storm control limited
value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps
and 0 means no limit.
Format storm-control broadcast-multicast <rate>
Mode Interface Config
11.4.14.4 storm-control broadcast-unknown
This command storm control limited
value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps
and 0 means no limit.
Format storm-control broadcast-unknown <rate>
Mode Interface Config
e.g. Switch(Interface 1)# storm-control broadcast-unknown 64
11.4.14.5 storm-control all-cast
This command storm control limited
value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps
and 0 means no limit.
Format storm-control all-cast <rate>
Mode Interface Config
11.4.15 rmon-counter command
This command specifies rmon counter capability on a port
Format rmon-counter {enable|disable}
Mode Interface Config
11.4.16 set igmp-router-port command
This command specifies igmp router port .
Format set igmp-router-port {ebable|disable}
Mode Interface Config
11.4.17 spanning-tree command
11.4.17.1 spanning-tree cost
This command configure RSTP port path cost, path cost value:0~200000000.
Format spanning-tree cost <pathcost>
Mode Interface Config
11.4.17.2 spanning-tree edge
This command configure edge property
Format spanning-tree edge {enable|disable}
Mode Interface Config
e.g. Switch(Interface 1)# spanning-tree edge enable
11.4.17.3 spanning-tree force-p2plink
This command configure force point to point link mode.
145 Asante IC3724PWR User’s Manual