Asante Technologies INTRACORE 3724PWR User Manual

Page 131

Advertising
background image

Mode Global Config
e.g. Switch(config)# monitor des 1 probetype ingress src 2-8
3) monitor des <port-ID> probetype egress
This command configures port monitor probetype as egress traffic.
Format monitor des <port-ID> probetype egress src <port list>
Mode Global Config
e.g. Switch(config)# monitor des 1 probetype egress src 2-8
11.3.12 dot1x commands
11.3.12.1 dot1x enable
This command enables global 802.1x function.
Format dot1x enable
Mode Global Config
11.3.12.2 dot1x disable
This command disables global 802.1x function.
Format dot1x disable
Mode Global Config
11.3.12.3 dot1x port-control
Configure port auto-authentication mode.
1) dot1x port-control enable
This command set auto-authorized on a list of ports.
Format dot1x port-control enable port <port list>
Mode Global Config
2) dot1x port-control disable
This command set force authorized on a list of ports.
Format dot1x port-control disable port <port list>
Mode Global Config
e.g. Switch(config)# dot1x port-control disable port 1-4
11.3.13 network commands
11.3.13.1 network mgmt-vlan
This command changes management vlan.
Format network mgmt-vlan <vlan-ID>
Mode Global Config
11.3.13.2 network parms
This command configures static IP address of the switch.
Format network parms <IP addr> <subnet mask> <gateway>
Mode Global Config
11.3.13.3 network protocol
This command configure switch dhcp client.
Format network protocol {dhcp|none}
Mode Global Config
11.3.13.4 network dhcp-relay
Configure switch dhcp relay functions.
1) network dhcp-relay mode
This command configures dhcp relay mode.
Format network dhcp-relay mode {enable|disable}
Mode Global Config
2) network dhcp-relay server
This command configures dhcp-relay server ip-address.
Format network dhcp-relay server <A.B.C.D>
Mode Global Config
3) network dhcp-relay vlan
Configure dhcp-relay option-82 vlan information.
network dhcp-relay vlan <vlan-ID> add
This command enters a vlan which will be enable DHCP-relay option82.
Format network dhcp-relay vlan <vlan-ID> add
Mode Global Config

131

Asante IC3724PWR

User’s Manual

Advertising