Asante Technologies INTRACORE 3724PWR - Manual (Page 140)

This command permits an ACL entry and queue 1-4 will assign priority queue
when rule activated.
Format access-list name <WORD> action permit {<cr>|queue <1-4>}
Mode Global Config
11.3.23.3 access-list name <WORD> clear
This command clears ACL entry contents.
1) access-list name <WORD> clears SRC IP
This command clears the source IP/subnet mask filter.
Format access-list name <WORD> clear SRC IP
Mode Global Config
2) access-list name <WORD> clears DST IP
This command clears the destination IP/subnet mask filter.
Format access-list name <WORD> clear DST IP
Mode Global Config
3) access-list name <WORD> clear L4port
access-list name <WORD> clear L4port SRC port
This command clears TCP/UDP source port filter.
Format access-list name <WORD> clear l4port SRC port
Mode Global Config
access-list name <WORD> clear l4port DST port
This command clears TCP/UDP destination port filter.
Format access-list name <WORD> clear l4port DST port
Mode Global Config
4) access-list name <WORD> clear packet-type
This command clears packet type filter.
Format access-list name <WORD> clear packet-type
Mode Global Config
5) access-list name <WORD> clear mac SA
This command clears a source mac address.
Format Access-list name <WORD> clear mac SA
Mode Global Config
6) access-list name <WORD> clear MAC DA
This command clears a destination mac address.
Format Access-list name <WORD> clear mac DA.
Mode Global Config
7)access-list name <WORD> clear VID
This command clears the 802.1Q VLAN tag of packet.
Format Access-list name <WORD> clear VID
Mode Global Config
8)access-list name <WORD> clear ether-type
This command clears ether type filter.
Format access-list name <WORD> clear ether-type
Mode Global Config
11.3.23.4 access-list name <WORD> deletes.
This command removes the ACL entry.
Format access-list name <WORD> deletes
Mode Global Config
11.3.23.5 access-list name <WORD> {enable|disable}
This command enables/disables the ACL entry.
Format access-list name <WORD> {enable|disable}
Mode Global Config
11.3.23.6 access-list name <WORD> set
1) access-list name <WORD> set priority
This command specifies ACL entry priority.
Format access-list name <WORD> set priority <0-65535>
Mode Global Config
140 Asante IC3724PWR User’s Manual