Asante Technologies INTRACORE 3724PWR - Manual (Page 127)

11.3 Global Config mode commands
11.3.1 exit
This command is used to exit current shell
Format exit
Mode Global Config
11.3.2 vlan
This command is used to configure vlan
11.3.2.1 vlan add
This command is used to create a new vlan
vlan add number
This command enter a vlan ID
Format vlan add number <vlan-ID>
Mode Global Config
vlan add range
This command enter a range of vlan ID
Format vlan add range from < vlan-ID > to <vlan-ID>
Mode Global Config
11.3.2.2 vlan delete
This command remove a existed vlan
Format vlan delete <vlan-ID>
Mode Global Config
11.3.2.3 vlan ingress
This command performs ingress vlan source port membership check
vlan ingress forward
The command is used to forward frame but don’t learn SA into ARL table
Format vlan ingress forward
Mode Global Config
vlan ingress drop
This command is used to drop frames violation vid
Format vlan ingress drop
Mode Global Config
vlan ingress bypass
This command is used to forward frame and learn SA into ARL table
Format vlan ingress bypass
Mode Global Config
11.3.2.4 vlan port
This command is used to configure 802.1Q port parameters for vlans
1) vlan port all
This command is used to configure all ports
vlan port all port-configure
This command is used to configure ports in a specific vlan
Format vlan port all port configure <vlan-ID>
Mode Global Config
vlan port all protected
This command is used to configure protected ports
Format vlan port all protected {enable|disable}
Mode Global Config
vlan port all pvid
This command is used to configure port pvid
Format vlan port all pvid <vlan-ID>
Mode Global Config
2) vlan port ports
This command is used to configure multiple ports
vlan port ports port-configure
127 Asante IC3724PWR User’s Manual