SHIMPO CEG-2000 User Manual
Page 15
-12-
6.3.6
Input channel selection (In items 1 and 2)
1)
With “INPUT” and the eight-digit display visible, press the ENT key. Next,
select an input channel.
2)
The current input channel will be displayed. Use the up and down arrow keys to
select an input channel.
3)
Select the input channel and press the ENT key.
6.3.7
Setting the decision upper limit value (Set for all items)
1)
With “MAX” displayed, press the ENT key.
2)
“Current decision upper limit value” will be displayed.
3)
Use the up and down arrow keys to input the new decision upper limit value.
4)
After selecting the decision upper limit value, press the ENT key.
5)
After decision upper limit value has been set, next will come selection of the
decision lower limit value. “MIN” will be displayed.
6.3.8
Setting the decision lower limit value (Set for all items)
1)
With “MIN” displayed, press the ENT key.
2)
The current decision lower limit value will be displayed.
3)
Use the up and down arrow keys to input the new decision lower limit value.
4)
After selecting the decision lower limit value, press the ENT key.
None
6.3.5 Item selection
Other
6.3.7 Setting the decision upper
limit value
Item being set in
items 1 and 2
6.3.9 Setting the large master value
Item being set in
item 3
6.3.5 Item selection
2) To state in which FINISH is
selected.