SHIMPO CEG-2000 - Manual (Page 16)

-13-
6.3.9 Setting the large master value (Set in items 1 and 2)
1) With “MAX M.” displayed, press the ENT key.
2) The current large master value will be displayed.
3) Use the up and down arrow keys to input the new large master value.
4) After inputting the large master limit, press the ENT key.
5) The eight-digit display will be shown.
6.3.10 Setting the small master value (Set in items 1 and 2)
1) With “MIN M.” displayed, press the ENT key.
2) The current small master value will be displayed.
3) Use the up and down arrow keys to input the new small master value.
4) After inputting the small master limit, press the ENT key.
5) The eight-digit display will be shown.
MIN M.
6.3.10 Setting the small master
value
ERR MAS
The value will return to what it was
before it was changed and the
display will be as in 2) above.
An error will be displayed if the
large master value is equal to or
less than the small master value.
Item 1, Item 2
Item 3, Item 4 Switches to the same state as in
2) in 6.3.5 Item Selection
ERR MAS
The value will return to what it was
before it was changed and the
display will be as in 2) above.
An error will be displayed if the
small master value is equal to or
greater than the small master value.