SHIMPO CEG-2000 - Manual (Page 9)

-6-
5 Specifications
Item Specification Comments
Input Electrically, 2 (4) channels
Measurement item 3 (Calculation 1)
Calculation method 1–2, 1+2, 2–1, AVE (1–2), AVE (1+2), AVE (2–1) 1=ITEM 1 2=ITEM 2
Measurement range
(mm) 0.00500 0.0100 0.0200 0.0500
0.100 0.200 0.500 1.00
Resolution (mm) 0.00005 0.0001 0.0002 0.0005
0.001 0.002 0.005 0.01
Bar display 101-dot (red, green, orange, bright/dark)
Bar display type Bar (OK: Green, Not OK: Red), Dots (Max./Min.)
Scale display Two-digit (numbers), two locations
Multi-function display Eight-digit (Numbers/letters)
Measured values, setting items, setting values,
error messages
Shift range ±300% (Full scale)
Decision ± Not OK/OK
Display of decision Bar display (color), items, decision lamp, multi-
function display
Automatic master
matching Small limit, large limit
Automatic master range Small: ±50% (full scale)
Large: ±20% (full scale)
Program entry Push-button on panel
Number of set programs 10
Power voltage and
frequency 85-256V AC 50/60Hz Comes with 100V AC
cable
Power capacity 30VA
Dimensions/weight 50mm (width) × 480mm (height) ×
200mm (depth), 4 kg
Operating temperature 0-45°C
Standard
External input buttons 4 (measurement, reset, large limit, small limit) Push-button, Foot SW
Serial output 1 (printer, PC) RS232C
Options
Printer output 1 (DP1) Digimatic
Decision output 8 (DC12/24V)
BCD output 1 set (DC12/24V)
Analog input 4 (connection to column)
Serial communication 1 RS422/RS485