West Control Solutions N8800 - Manual (Page 63)

g
Resetting the controller configuration to factory setting (Default)
r chapter 11.1 (page 82)
Parameter setting level
8800 process controller 63 Parameters
Name Value range Description Default
t.F2 0,0...999,9 Filter time constant [s] 0,5
InP.3
Name Value range Description Default
InL.3
-1999...9999 Input value for the lower scaling point 0
OuL.3
-1999...9999 Displayed value for the lower scaling point 0
InH.3 -1999...9999 Input value for the upper scaling point 20
OuH.3 -1999...9999 Displayed value for the upper scaling point 20
t.F3 0,0...999,9 Filter time constant [s] 0,5
Etc.3 0...100 (°C)
32...212 (°F
External cold-junction reference temperature (external TC) OFF
Lim
Name Value range Description Default
L.1
-1999...9999 Lower limit 1 -10
H.1
-1999...9999 Upper limit 1 10
HYS.1 0...9999 Hysteresis limit 1 1
dEl.1 0...9999 Alarm delay from limit value 1 0
L.2 -1999...9999 Lower limit 2 OFF
H.2 -1999...9999 Upper limit 2 OFF
HYS.2 0...9999 Hysteresis limit 2 1
dEl.2 0...9999 Alarm delay from limit value 2 0
L.3 -1999...9999 Lower limit 3 OFF
H.3 -1999...9999 Upper limit 3 OFF
HYS.3
0...9999 Hysteresis limit 3 1
dEl.3
0...9999 Alarm delay from limit value 3 0