Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 20)

Split View
In Split View, the current route is shown in a list at the top of the screen and on a map below the route list
Figure 17: Split View screen
The status of Geocoding is shown in the bar on the left side of the map In Figure 17, the status shows “GPS OFF” indicating
that Geocoding is not active
The status bar at the bottom of the screen gives the current status of the ORION ME mobile transceiver and ORION CE mobile
receiver In Figure 17, the status bar shows meter readings are in progress (green), the progress field (green dots) visually
indicates the reading is about one-fifth completed and the number of meters read (“Read 4 of 25”) displays next to the
progress field
In Split View, both the List View and Map View buttons are active on the main tool bar The Split View display is static The
number of lines listed and the map size depend on the laptop monitor display and/or resolution settings
To view the list or the map in full screen, click the button for the view you wish to close
Figure 18: Status bar
To exit from this screen, click Done (red square icon) on the main tool bar as shown in Figure 18
Exit screen
ReAdING A ROuTe
Page 20 April 2014 ORION® Meter Reading System (ORS)