Work items – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual

Page 58

Advertising
background image

Work Items

When ORS is used with ReadCenter Analytics or Analytics Mobile software, the reading data management software operator

can request work items to collect extended status, historical interval data and/or the endpoint firmware version using the

two-way communication functionality of the ORION Migratable endpoints Work items can be set up for automatic collection

or they can be performed manually by the meter reader
In List View , the meter icons indicate if any automatic work items are pending Depending on the status and type of meter,

one of the following meter icons displays See

"Meter Icons" on page 25

for complete details

Water: Reading and work items pending

Water: Reading received, work items pending

Gas: Reading and work items pending

Work items can be collected or viewed on the Service Details screen for an ORION ME account With the Current Reading

tab selected on the Service Details screen, four tabs are displayed: Reading, Extended Status, Interval History and

Firmware Version An example is shown in Figure 62 To access the Service Details screen, click the Details button on the List

View screen

Figure 62: Service details screen with work items

When a tab is selected, the message on the screen indicates the status

“Required”

Displays at the top of the screen if an automatic work item has been requested The buttons

are not active and the information is viewable but cannot be changed

“Not Required/Optional” Displays if an automatic work item was not requested The buttons are active and the work

item can be requested manually

“Action Complete”

Displays when the work item (automatic or manual) is complete

A green check mark on a tab indicates a work item was performed and the information has

been received On the Reading tab, a green check mark indicates a reading has been received

File Type

Data collected via work items, automatically or manually, is saved as an xml file and sent back to ReadCenter Analytics or

Analytics Mobile with the route file For additional information, refer to

"Historical Interval File Type" on page 60

TWO-WAy COMMuNICATIONS

Page 58

April 2014

ORION® Meter Reading System (ORS)

Advertising
This manual is related to the following products: