Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 31
Choosing Reader Codes
Reader Codes are used to report non-trouble information about a meter, such as a name change or appointment Reader
Codes are defined in the reading data management software and downloaded to ORS
Figure 30: Reader Codes
1 With the Comment Codes/Messages tab selected on the Service Details screen, click one of the Select buttons
under Reader Codes
2 Click the appropriate code and then click OK
Result: The code becomes part of the information ORS collects from the Service details screen for the account.
3 If you want to select another Reader Code, repeat steps 1 and 2 Up to three Reader Codes can be selected for each
customer record
4 To remove a Reader Code, click Cancel
OTEE:
N
When readings are sent back to the reading data management software, reports of meters with these codes can
be generated
SeRVICe deTAILS
Page 31
April 2014
ORION® Meter Reading System (ORS)