Service details, Current reading – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual

Page 27

Advertising
background image

SERVICE DETAILS

The Service Details screen displays all of the information stored in ORS for each account You can view the details for the

customer, enter codes, messages and manual meter readings You can also access the two-way communication functionality

for ORION Migratable and Fixed Network (in mobile mode) endpoints
Access the Service Details screen by clicking the Details button next to the account line item in List View

OTEE:

N

The Service Details screen is also available when performing a Quick Read

The Service Details screen has two tabs: Current Reading and Comment Codes/Messages

Figure 26: Service details screen – Reading from ORION Me endpoint

Current Reading

The Current Reading tab of the Service Details screen displays the current meter reading, date and time along with meter

information from the reading data management software The type of endpoint technology is displayed in the upper right

corner of the screen

Account Number

Indicates the account number from the reading data management software

Service Type

Describes the service type being measured by the meter, such as water, electric, gas, etc

Module S/N

The serial number of the ORION endpoint assigned to the meter The serial number allows ORS

to uniquely identify each meter The serial number is sent from the reading data management

software and is cannot be changed

The Actual Read Method, Read date/Time and Reader Id are displayed below the Module S/N

Current Reading

The current reading value is displayed in this field If the meter is a gas meter, the index value

displays instead of the subcount

Unread

If the meter is not read, the word “Unread” appears in the reading field

Low Reading

If the current reading is lower than this value, it will be considered low

“Low Read” displays below the reading

High Reading

If the current reading is higher than this value, it will be considered high

“High Read” displays below the reading

Potential Leak

If the ORION endpoint detects a potential water leak, “Pot Leak” displays

below the reading See Figure 27 on the next page

SeRVICe deTAILS

Page 27

April 2014

ORION® Meter Reading System (ORS)

Advertising
This manual is related to the following products: