Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 12)

Trimble
®
Ranger™ Serial Repeater Programmer
Installation and Operation Manual
June 2009
After correcting a serial number or adding a new serial number, touch Done [X] or press “X” on
the keyboard. You will be returned to the Program Repeater screen where the changes you
have made will appear in the SN column:
If programming fails you will go to the screen below. Touch “OK” or press Enter to return to the
Program Repeater screen on page 7.
If you touch OK <Enter> on the Repeater Programmer screen or press Enter on the keyboard,
and no changes have been made, you will see:
If Yes is touched or “Y” on the keyboard is pressed, the screen below will appear:
11