Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 8)

Trimble
®
Ranger™ Serial Repeater Programmer
Installation and Operation Manual
June 2009
Button Functions
Read [R]—Touch the button or press “R” on the keyboard to read values from the repeater.
Prog [P]—Touch the button or press “P” on the keyboard to program the repeater with the
current list.
Tools [T]—Touch the button or press “T” on the keyboard to display the Diagnostic Tools Menu.
/\ [U]—Touch the button or press “U” on the keyboard to move the high-lighting of a serial
number one step up the SN List.
\/ [D]—Touch the button or press “D” on the keyboard to move the high-lighting of a serial
number one step down the SN List.
Remove [M]—Touch the button or press “M” on the keyboard to remove the selected SN from
the list.
Edit [E]—Touch the button or press “E” on the keyboard to display the Edit Selected SN screen
for the highlighted serial number.
Clear [C]—Touch the button or press “C” on the keyboard to remove all SNs from the list.
Show Details [S]—Touch the button or press “S” on the keyboard to get more information about
the selected SN.
Done [X]—Touch the button or press “Enter” on the keyboard to make permanent any changes
you have made.
Using The Program Repeater
When you access Begin Programming on the Main Menu, the Program Repeater screen that
appears will be blank:
7