PATLITE NHL - Manual (Page 20)

20
2
2.6 Network Setup with the DHCP Function
This product can access a DHCP Server to acquire network information.
2.6.1 Setup Method with the “TEST” Switch
1. First, connect this product with the network environment to be used. (Refer to Fig. 2.5.3)
2. Set the volume level switch to "LOW" before applying power to this product.
3. Push the "TEST" Switch while inserting the power connector into the power outlet.
4. The DHCP function takes effect when this product starts up.
2.6.2 Setup Method with the Web Setup Tool
1. Select the IP Address Setup Method in the "System Configuration" screen as "Setup Automatically."
(Refer to Fig. 2.6.1)
2. Setup the device and host name, etc. as needed.
3. Click the "Set" button to save all changes and to activate them.
4. After the "Set" button is clicked, the Web Setup Tool changes to another screen to reboot the product; click
the "Network Reboot" icon to continue. (Refer back to Fig. 2.5.4)
5. Rebooting the network takes about 20 seconds.
Fig. 2.6.1 System Setup Screen (for DHCP Automatic Setup)
Please
If this product is unable to access a DHCP Server, it will return to the factory default network
information. When the DHCP function is used, any future connections are started after the
DHCP function setup is activated. When it is necessary to use the manual settings, please use
the Web Setup Tool and our PNS Manager software tool.
①
②
②
③