PATLITE NHL - Manual (Page 32)

32
3
test/dotest Command
Contents : Executes confirmation of the Signal Tower and buzzer operation in sequence order of Red,
Amber, Green, Blue, White and Buzzer Pattern1.
Syntax : test , dotest
Return Value : None
[Command Transmission Example]
Ex. 1) A product with an IP address of [192.168.10.10] can verify operation of the Signal Tower.
The common login name for the Signal Tower status confirmation is "patlite".
rsh 192.168.10.10 -l patlite test
rsh 192.168.10.10 -l patlite dotest
Signal Tower status confirmation is executed (no Login Name):
rsh 192.168.10.10 test
rsh 192.168.10.10 dotest
Ex. 2) A product with an IP address of [192.168.10.100] can verify operation of the Signal Tower.
The designated sender user name for the Signal Tower status confirmation is "root"
rsh 192.168.10.100 -l root test
rsh 192.168.10.100-l root dotest
Signal Tower status confirmation is executed (no Login Name):
rsh 192.168.10.100 test
rsh 192.168.10.100 dotest
3.8.2 RSH Alert Timer Reset Function
The RSH alert timer reset function is capable of being selected for "Shared" or "Individual" when setting up the
timer function for the Signal Tower lights and buzzer control.
(Refer to 3.8.2 "Timer Reset Function")
Shared :
Each Signal Tower tier and buzzer are controlled by a common timer.
Individual : Each Signal Tower tier and buzzer are controlled by individual timers.