PATLITE NHL - Manual (Page 49)

49
4
Table 4.6.1 E-mail Transmission Setup Protocol
Item Contents
Default
Value
Input Parameter
Setting
Option
SMTP Server
Address
Set the IP Address of the SMTP
Server
0.0.0.0
Characters which can be used for a
server address
Maximum 63 Characters
—
SMTP Port
Number
Set the port number of the
SMTP Server
25 Half-width numbers from 1 to 65535 —
Authentication
Protocol
Select among “SMTP Authen-
tication/POP Authentication/No
Authentication”.
No
Authentication
— —
Encrypted
Connection
Select between “SSL”, “TLS” or
“None”.
None — —
SMTP Account
Name
Set the user name for SMTP
Authentication.
Blank
Half-width alphanumeric characters,
characters which can be used for
E-mail addresses
Maximum 32 characters
O
SMTP Authentication
Password
Set up the password for SMTP
Authentication.
Blank
Half-width alphanumeric characters
Maximum 32 characters
O
POP3 Server
Address
Set up the POP3 server IP Ad-
dress.
Blank
Characters which can be used for a
server address
Maximum 63 Characters
O
POP3 Port Number Set up the port number for the
POP3 server.
110 Half-width numbers from 1 to 65535 —
Account Name
Set up the user name of the
POP Authentication.
Blank
Half-width alphanumeric characters,
characters which can be used for
E-mail addresses
Maximum 32 characters
O
Password
Set up the password for POP
Authentication
Blank
Half-width alphanumeric characters
Maximum 32 characters
O
Source Address
Set up the E-mail address for
the designated sender.
Blank
Characters which can be used for an
E-mail address
Maximum 63 Characters
O
Destination Addresses
1 through 8
Set up the destination addresses
for the E-mail to be sent to.
Blank
Characters which can be used for an
E-mail address
Maximum 63 Characters
O