PATLITE NHL - Manual (Page 76)

5
76
OID Name Model MAX-ACCESS Comment
1 ident ID Group
1.1.0 identSWinitVersion String(2) read-only OS Version
1.2.0 identSWAgentVersion String(3) read-only Application Version
1.3.0 idensHWVersion String(3) read-only Hardware Version
4 monitor Monitor Group
4.1 pingServer ping monitoring setting
4.1.1.0 pingServerNumEntries INTEGER read-only Ping monitoring count
4.1.2.0 pingServerTable not-accessible ping monitoring table
4.1.2.1.0 pingServerTableEntry not-accessible
4.1.2.1.1.(index) pingServerTableIndex INTEGER read-only ping monitoring index
4.1.2.1.2.(index) pingServerName STRING(31) read-only ping monitor name
4.1.2.1.3.(index) pingServerAlertValue
INTEGER{ normal(1),
occurred(2) }
read-only
ping monitor condition
normal(1), event occurred(2)
4.1.2.1.4.(index) pingServerIpAddress STRING(63) read-only ping monitoring address
4.3 logDump log setting
4.3.1.0 logDumpEventlog1 OBJECT IDENTFIER read-only event log from 1 to 85
4.3.2.0 logDumpEventlog2 OBJECT IDENTFIER read-only event log from 86 to 170
4.3.3.0 logDumpEventlog3 OBJECT IDENTFIER read-only event log from 171 to 255
5.1 controlLight signal tower control
5.1.1.0 controlLightNumEntries INTEGER read-only count of control entries
5.1.2.0 controlLightTable not-accessible signal tower table
5.1.2.1.0 controlLightTableEntry not-accessible
5.1.2.1.1.(index) controlLightDeviceColor
INTEGER {red(1), am-
ber(2), green(3), blue(4),
clear(5), buzzer(6) }
read-only
signal tower color
R(1)/Y(2)/G(3)/B(4)/C(5)/Buz(6)
5.1.2.1.2.(index) controlLightControlState
INTEGER {turn-off(1),
turn-ON(2), blinking-pat- -pat-
tern(3), nop(4), blinking-
patern2(5), sound-
pattern4(6) }
read-write
Signal Tower Status: lights and buzzer
off(1)/lighting and buzzer synchronized
with light pattern1(2)/flashing pattern1
and buzzer synchronized with light
pattern2(3)/no change(4)/flashing pat-
tern2 and buzzer synchronized with light
pattern3(5)/buzzer synchronized with light
pattern 4(6). controlLightControlTimer is
set by entering values above zero.
5.1.2.1.3.(index) controlLightControlTimer INTEGER(-1,99) read-write
A preset value is decremented for every
second until it is 0, then it changes to the
status designated by the controlLightCon-
trolState.
5.1.2.1.4.(index) controlLightCurrentState
INTEGER { off(1), on(2),
blinking-pattern1(3),
blinking-pattern2(4),
sound-pattern4(5) }
read-only
The present status is displayed.
lights and buzzer off(1)/lighting and buzzer
synchronized with light pattern1(2)/flash-
ing pattern1 and buzzer synchronized
with light pattern2(3)/flashing pattern2 and
buzzer synchronized with light pattern3(4)/
buzzer synchronized with light pattern4(5)
5.1.3.0 controlLightSnmpClear
INTEGER{ execute(1),
nop(0) }
read-write
execute(1) setup will clear the Signal
Tower operation.
6 Trap
6.1 trapPatliteAlarmAdded OBJECT-IDENTIFIER not-accessible When an abnormality in the PING occurs
6.2 trapPatliteAlarmRemoved OBJECT-IDENTIFIER not-accessible When an abnormality in the PING is
restored
6.3 trapPatliteTrapReceived OBJECT-IDENTIFIER not-accessible When a trap is received
6.4 trapPatliteClearExecuted OBJECT-IDENTIFIER not-accessible When the clear button is pushed
6.5 trapPatliteRshExecuted OBJECT-IDENTIFIER not-accessible When an RSH command is executed
6.6 trapPatliteAppMonitorAlarmAdded OBJECT-IDENTIFIER not-accessible When an abnormality in the application
occurs
6.7 trapPatliteAppMonitorAlarmRemoved OBJECT-IDENTIFIER not-accessible When an abnormality in the application is
restored
6.8 trapPatliteTestSwExecuted
OBJECT-IDENTIFI-
ER
not-accessi-
ble
When the test switch is pushed
Table 6.2.1 MIB Specifications